3D print the Volkstheater, Vienna
A free, printable 3D model of the Volkstheater in Vienna and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Volkstheater, Vienna in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine detail on a theater building
Print friendly adapts thin parts and small details to the print scale; Full detail keeps every modeled feature, which suits a larger print and a 0.12–0.16 mm layer height.
- One piece with the ground
The Volkstheater, Vienna is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Volkstheater, Vienna takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Volkstheater, Vienna
The Volkstheater, which translates as "People's Theatre," stands in Vienna's seventh district, Neubau. It was founded in 1889 at the request of the city's citizens, among them the dramatist Ludwig Anzengruber and Thonet, the furniture maker. Their aim was to give Vienna a popular counterweight to the Hofburgtheater. Ferdinand Fellner and Hermann Helmer drew up the designs, and they tried to reconcile their plans with historicism.
The founders wanted to bring classical and modern literature to wider circles of Viennese, staged next to more traditional plays. The house follows that tradition with new productions of the classics, fresh readings of Ferdinand Raimund and Johann Nestroy, plus many new plays and reruns. It gives special attention to Austrian playwrights, old and new. In 2005 it also opened Volkstheater Hundsturm, an alternative stage for experimental theater, in Vienna's fifth district, Margareten. The Vienna U-Bahn's U2 and U3 lines share a Volkstheater station at the site.
About this model
The Volkstheater, Vienna is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
