A white 3D print of the Wellington Arch, a columned arch topped with a sculpture of horses and a chariot, standing on a green traffic island between roads.

3D print the Wellington Arch

A free, printable model of the Wellington Arch on its traffic island, with the surrounding roads and green space, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Wellington Arch model, North view North
  • Wellington Arch model, East view East
  • Wellington Arch model, South view South
  • Wellington Arch model, West view West

© OpenStreetMap contributors

The model you print

Wellington Arch in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
8 mm
Scale
1:3,750

8 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Delicate sculpture on top

    The winged figure and horses on the roof are the thinnest parts of the model. Use Print friendly, or Full detail at a larger print size, with 0.12-0.16 mm layers to keep them crisp.

  2. Slender columns

    The arch carries narrow columns on its faces. Printing at a larger size, or slowing down on the upper layers, helps these thin vertical details come out cleanly.

  3. One piece with the ground

    The Wellington Arch is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Wellington Arch takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Wellington Arch

The Wellington Arch, designed by Decimus Burton, is a triumphal arch with a Grade I listing. It is a centerpiece of Hyde Park Corner, a road junction next to Hyde Park's south-eastern corner in central London, and it stands on a large green traffic island with pedestrian crossings. Other names are the Constitution Arch and, originally, the Green Park Arch. A ceremonial byway between Hyde Park and Constitution Hill runs through it, and official processions can use that route.

Construction ran from 1826 to 1830 and formed part of a stately approach leading from Hyde Park toward Buckingham Palace. In 1882–1883 the arch was dismantled and reassembled a short distance away, at the top of Constitution Hill, where it faces west. A moratorium on expenditure from 1828 meant that all the sculpture planned for it was left out. It has one opening and follows the Corinthian order.

In 1837 a public subscription began for a statue on horseback of the first Duke of Wellington, meant to top the arch. In 1846, over Burton's vehement objections, a colossal statue by Matthew Cotes Wyatt was installed there, which is how the arch got its familiar name. It was not reinstated after the move and was re-erected at Aldershot in 1885. Since 1912 a bronze by Adrian Jones of Nike, goddess of victory, in a four-horse chariot (quadriga) has topped the arch.

About this model

The Wellington Arch is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in London

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits