3D print the West Wing
A free, printable model of the West Wing and the streets and buildings around it in Washington, D.C., generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A low office block
The wing is a low block, so its detail sits in the wall faces rather than in height. Layers of 0.12 to 0.16 mm keep those straight edges crisp.
- One piece with the ground
The West Wing is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The West Wing takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the West Wing
The West Wing is the part of the White House where the president of the United States has his offices. It holds the Roosevelt Room, the Situation Room, the Cabinet Room and the Oval Office, and on its three floors are also the offices of the vice president, the chief of staff, the counselor and senior advisor to the president, the press secretary and their staffs. A press briefing room named for James S. Brady stands along the colonnade that connects the wing to the Executive Residence, next to the press secretary's office.
Before the wing was built, the president and his staff had their offices on the second floor at the east end of the Executive Residence. Theodore Roosevelt found the rooms too small for his family of six children and his staff. In 1902 Edith Roosevelt, the first lady, brought in the firm McKim, Mead & White to keep the family's living quarters apart from the offices, and Congress approved more than half a million dollars for the work. The wing was built as a temporary office structure, on ground that had held stables and greenhouses.
In 1909 William Howard Taft extended the building southward over the tennis court and put the first Oval Office in the middle of the new south front. Herbert Hoover excavated a partial basement, and after a four-alarm fire damaged the wing on December 24, 1929, he had it rebuilt in 1930 and added air-conditioning. Franklin D. Roosevelt brought in the architect Eric Gugler in 1933; the redesign added a new Cabinet Room and Oval Office on the east side.
About this model
The West Wing is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
