3D print the Widzew Łódź Stadium
A free, printable 3D model of the stadium and its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Widzew Łódź Stadium in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Four stands around a pitch
A stadium is a wide, low model, so print size decides how much of the stands' detail survives. Use Full detail on a larger print and Print friendly on a small one.
- Fine layers for edges
A layer height of 0.12–0.16 mm keeps the outline of the roof and stands crisp.
- One piece with the ground
The Widzew Łódź Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Widzew Łódź Stadium takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Widzew Łódź Stadium
In Łódź, Poland, the football stadium called Stadion Widzewa Łódź in Polish serves as the home ground of Widzew Łódź. It is an all-seater stadium with a capacity of 18,018. Its predecessor held 10,500 seats, but only part of the West Stand was covered, and the old stadium came down in early 2015 to make room for the new one. Until the new stadium was completed, Widzew played its home games at Piotrków Trybunalski.
Plans for the 18,018-seat stadium were announced in October 2014, and Mosty Łódź was the main contractor. Unlike earlier proposals, every seat is covered. Panels that are transparent and back-lit, plus red brick, clad the exterior. The West Grandstand remains the main stand; it holds the changing rooms, a gym, 8 commentary boxes, 24 corporate boxes and 2 TV studios. The pitch was shifted 20 m to the east to fit the larger West Stand. The other three stands have simpler facilities and include room for 900-1200 visiting supporters.
The stadium was also designed to take rugby matches, including those of the local club Budowlani Łódź, and concerts, and the North stand was planned with a stage built in. Local roads and tram lines were upgraded along with it. FIFA's 2019 U-20 World Cup began and ended here, with the opening match and the final played at the stadium; Łódź was one of six host cities.
About this model
The Widzew Łódź Stadium is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
