A white 3D print of Ajinomoto Stadium, a low bowl of seating with a roof rim above the upper level, set among the surrounding streets and buildings.

Ajinomoto Stadium in 3D

Ajinomoto Stadium appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Ajinomoto Stadium model, North view North
  • Ajinomoto Stadium model, East view East
  • Ajinomoto Stadium model, South view South
  • Ajinomoto Stadium model, West view West

© OpenStreetMap contributors · Terrain in Japan: 出典:国土地理院 (GSI elevation data via Mapterhorn)

Copyright notice

The design of Ajinomoto Stadium may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
10 mm
Scale
1:4,063

10 mm tall on a 160 mm print

Make this print opens the generator on a 650 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Low bowl, thin roof rim

    The stadium prints as a low bowl of seating, so most of it is wide and shallow. The roof edge over the upper level is thin at print scale; a larger print or Full detail keeps it intact.

  2. Sunken pitch and tiers

    The field sits below the surrounding ground, so the inner bowl has depth. Layers of 0.12 to 0.16 mm keep the stepped seating readable, and Print friendly adapts the smallest of those steps.

  3. One piece with the ground

    Ajinomoto Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Ajinomoto Stadium takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Ajinomoto Stadium

Ajinomoto Stadium is a stadium used for several sports in Chōfu, Tokyo, Japan. Its own name is Tokyo Stadium, and the Ajinomoto name comes from a sponsorship deal. It was founded in March 2001 on Kantō Mura, a redevelopment area that had previously been used by United States Forces Japan. It became the country's first stadium to sell naming rights, and the buyer was Ajinomoto Co., Inc.

FC Tokyo and Tokyo Verdy, both of the J1 League, play their home games there, and the ground also hosts rugby and lower-division football. Saudi Arabia's national side trained at Chōfu for the 2002 FIFA World Cup, using the stadium as its main practice ground, but no World Cup match took place in it. At the 2020 Summer Olympics the stadium served as the rugby venue, and it was also a venue at the 2019 Rugby World Cup, where it hosted the opening ceremony and the opening match as well as seven more games, among them the Bronze Final.

The stand seats 49,970 people on two all-seated levels, and the whole upper level is covered by a roof of Teflon and polycarbonate. The pitch lies lower than the land around the stadium, a measure taken to stay within height limits near the airport. Concerts and flea markets are also held at the ground.

About this model

Ajinomoto Stadium is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits