3D print Augsburg Arena (WWK Arena)
A free, printable model of the Augsburg Arena, with its open center and woven exterior, and the streets and buildings of Augsburg around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Augsburg Arena (WWK Arena) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Woven steel facade
The exterior is a layered web of thin horizontal and crossed tubes around an open base. Print friendly adapts this fine skin; Full detail or a larger print keeps the crossings readable.
- Flat roof and open center
A thin sheet roof surrounds an open rectangular center. A layer height of 0.12–0.16 mm keeps the roof edge and the trusses beneath it crisp.
- One piece with the ground
Augsburg Arena (WWK Arena) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Augsburg Arena (WWK Arena) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Augsburg Arena (WWK Arena)
The Augsburg Arena, known commercially as the WWK Arena, is a football ground in the Bavarian city of Augsburg, Germany. FC Augsburg plays its home matches there, in a stadium that holds 30,660 spectators: 19,060 seats and space for 11,034 standing spectators. The ground is also called the Schwabenstadion.
The stadium replaced the club's previous home, the Rosenaustadion, and FC Augsburg played its first match there in 2009. It opened as the Impuls Arena, became the SGL Arena in May 2011, when SGL Carbon bought the naming rights, and took the WWK name on July 1, 2015. WWK is an insurance company.
Augsburg hosted matches at the 2010 women's under-20 World Cup and again at the 2011 women's World Cup, including group games and quarterfinals. It is described as the world's first climate-neutral football stadium, using six ecological heat pumps, each 40 m deep, and a bio natural gas boiler. The heat pumps use heat exchangers to set the temperature.
About this model
Augsburg Arena (WWK Arena) is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
