3D print the Petronas Tower 3
A free, printable model of Petronas Tower 3 and the surrounding city of Kuala Lumpur, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Petronas Tower 3 in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 267 m
- On a 160 mm print
- 75 mm
- Scale
- 1:3,750
267 m of the Petronas Tower 3, 75 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Crown and open lattice
The top is a broad flat screen above an open perimeter lattice. Full detail keeps the screen edges and fine vertical ribs; Print friendly simplifies them for a small print.
- Bands and slender mullions
Horizontal floor bands and narrow mullions give the shaft its texture. A larger print or a 0.12 to 0.16 mm layer height helps these shallow ledges stay readable.
- One piece with the ground
The Petronas Tower 3 is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Petronas Tower 3 takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Petronas Tower 3
Petronas Tower 3 is a 60-story skyscraper in the KLCC district of Kuala Lumpur, Malaysia, and part of the Petronas Towers complex. It rises 267 meters, including a 21-meter crown-like structure on top of a 246-meter main body. Below the offices, a six-level extension of the Suria KLCC shopping mall sits at its base; the floors above are given over to office space. The building is Malaysia's eighth tallest building.
Construction began in late 2006 and was completed in 2012. The tower is the headquarters of Petronas Carigali, Petronas's E&P arm, and houses some local subsidiaries of multinational corporations including Microsoft Malaysia. Its development cost was reported at RM1 billion, and of its floor space, 78,000 m2 (840,000 square feet) is net lettable office area.
About this model
The Petronas Tower 3 is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
