3D print B&W Hallerne
A free, printable model of B&W Hallerne, a pair of large gabled halls with ridge monitors, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
B&W Hallerne in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 18 mm
- Scale
- 1:3,750
18 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Ridge monitors and roof stacks
Narrow monitors run along the ridges and a few small stacks stand on the lower hall. Print friendly adapts these small parts to the print scale; Full detail keeps them on a larger print.
- Large flat wall panels
The wide end walls carry shallow panel lines. A layer height of 0.12–0.16 mm keeps those lines crisp.
- One piece with the ground
B&W Hallerne is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. B&W Hallerne takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About B&W Hallerne
B&W Hallerne, which means The B&W Halls in English, is a former industrial complex, found on Refshaleøen, an island in Copenhagen, Denmark. Burmeister & Wain built it in the early 1960s. The complex is made up of two large halls, and ships were built in them until 1996. The facilities host culture and entertainment activities.
On September 2, 2013, DR, the Danish public broadcaster, revealed that it had picked B&W Hallerne to stage the 2014 Eurovision Song Contest. The event took place in Section Hall 2, turned into a music venue with room for 11,000 spectators. The buildings and grounds around it were turned into "Eurovision Island", used for extra services tied to the contest.
About this model
B&W Hallerne is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
