3D print the Danube Arena
A free, printable model of the Danube Arena in Budapest, with its wavy ribbon-clad hall beside the water and the surrounding paths and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Danube Arena in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 14 mm
- Scale
- 1:3,750
14 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Thin stacked wave ribbons
Long, wavy bands wrap the tall hall. Print friendly adapts thin parts like these to your print scale; a larger print or Full detail keeps them as modeled.
- Fine terrace posts below
A base of slabs and rows of slim posts sits under the ribbons. A layer height of 0.12–0.16 mm keeps these thin parts crisp.
- One piece with the ground
The Danube Arena is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Danube Arena takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Danube Arena
In Budapest, Hungary, the Danube Arena (Duna Aréna in Hungarian, also unofficially known as the Dagály Budapest Aquatics Complex) is a swimming and water-sports venue. Marcell Ferenc was its designer, and construction ran from 2015 to 2017. Plans first called for it to stage the 2021 World Aquatics Championships. Then Guadalajara pulled out of hosting the 2017 edition in February 2015, and Budapest stepped in.
Because the hosting duties moved four years sooner than planned, the building was redesigned. The first plan was too small to serve as a possible 2024 Summer Olympics venue, and the schedule had tightened. The facility includes a diving pool, a short course training pool and two swimming pools of Olympic size.
Permanent seating totals 5,000. Another 8,000 temporary seats served the 2017 World Aquatics Championships and then came down. Later events included the 2020 European Aquatics Championships, several FINA Swimming World Cup stops, and the 2022 World Aquatics Championships.
About this model
The Danube Arena is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
