A white 3D print of one long roofed grandstand of the General Kazimierz Sosnkowski Municipal Stadium, among surrounding paths and buildings.

General Kazimierz Sosnkowski Municipal Stadium in 3D

The General Kazimierz Sosnkowski Municipal Stadium appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • General Kazimierz Sosnkowski Municipal Stadium model, North view North
  • General Kazimierz Sosnkowski Municipal Stadium model, East view East
  • General Kazimierz Sosnkowski Municipal Stadium model, South view South
  • General Kazimierz Sosnkowski Municipal Stadium model, West view West

© OpenStreetMap contributors

Copyright notice

The design of General Kazimierz Sosnkowski Municipal Stadium may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
3 mm
Scale
1:3,750

3 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Long, low roofed stand

    The model is a single very long, low stand under a flat roof with a fine railing along its edge. A larger print keeps that edge readable, and a 0.12–0.16 mm layer height keeps it crisp.

  2. One piece with the ground

    The General Kazimierz Sosnkowski Municipal Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The General Kazimierz Sosnkowski Municipal Stadium takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the General Kazimierz Sosnkowski Municipal Stadium

Warsaw, Poland, is home to the General Kazimierz Sosnkowski Municipal Stadium, also called Polonia Warsaw Stadium and nicknamed K6, a multi-purpose ground. Football is its main use, and Polonia Warsaw plays its home matches there. Built in 1928, the ground had its East stand thoroughly modernized in 2004. It was a training venue for UEFA Euro 2012 and holds 6,852 seats.

The main stand has 4,889 seats, is fully covered and stands considerably high. The concrete east stand, with 1,611 seats, is known as trybuna kamienna, the "stone stand", and it has stone steps; it was originally standing room only and was fully reconstructed in 2004 with overhead cover. A sector for special guests on the north side, near ul. Międzyparkowa, has 352 seats. The American football team Warsaw Eagles has used the stadium as a home venue since 2013, and the Polonia Warsaw reserve team also calls it home.

About this model

The General Kazimierz Sosnkowski Municipal Stadium is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Warsaw

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits