3D print InterContinental Warsaw
A free, printable 3D model of InterContinental Warsaw and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
InterContinental Warsaw in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 164 m
- On a 160 mm print
- 44 mm
- Scale
- 1:3,750
164 m of InterContinental Warsaw, 44 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower with a cut-out shape
A tall hotel tower is slender for its height. Print slowly with good cooling, and use Print friendly at small sizes so thin sections stay sturdy; larger prints with Full detail keep the cut-out shape.
- One piece with the ground
InterContinental Warsaw is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. InterContinental Warsaw takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About InterContinental Warsaw
In Warsaw, Poland, the five-star InterContinental Warsaw hotel stands between Sosnowa, Śliska and Emilia Plater Streets. A team of architects led by Tadeusz Spychała designed it. Building started in 2001 and finished in November 2003. As the tallest hotel in Poland, it is also the third-tallest in Europe and ranks among the world's tallest five-star hotels. The tower's unusual form is finished in pea-green tones, matching the neighboring Warsaw Financial Center.
The hotel has 414 rooms, including a presidential suite and 76 luxury suites with kitchenettes, plus 13 conference rooms, a ballroom, two bars and two restaurants. The pool, 150 meters up, occupies the 43rd and 44th floors and is Europe's highest indoor pool. Beneath the tower, a car park on five levels holds 175 vehicles. Construction cost over 100 million Euros, and the foundation, 20.7 meters deep, is the deepest of any skyscraper in Poland.
Building it meant closing the site for almost a year and demolishing the Akwarium, a legendary Polish jazz club; the club moved to the Złote Tarasy shopping complex nearby. Residents of the surrounding blocks protested that the tower would block the sun. An agreement was reached, and thanks to the tower's "cut out" form, light reaches nearby buildings with fewer restrictions. The hotel stands opposite the house of the pianist Władysław Szpilman.
About this model
InterContinental Warsaw is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
