3D print Jakarta International Stadium
A free, printable 3D model of Jakarta International Stadium in Tanjung Priok, Jakarta, generated from real map data in your browser, with the surrounding city beyond its rounded shell.
-
North
-
East
-
South
-
West
The model you print
Jakarta International Stadium in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 73 m
- On a 160 mm print
- 17 mm
- Scale
- 1:4,375
73 m of Jakarta International Stadium, 17 mm on your shelf
Make this print opens the generator on a 700 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Striped shell and roof cassettes
The shell is made of many thin vertical strips, and two raised roof cassettes sit over the open roof. Print friendly adapts these narrow parts at small scales; Full detail suits a large print.
- Open roof rim
The open roof ring and its steelwork are the most delicate parts. A layer height of 0.12–0.16 mm and a larger print keep the rim and cassettes crisp.
- One piece with the ground
Jakarta International Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Jakarta International Stadium takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Jakarta International Stadium
Jakarta International Stadium is a football ground with a retractable roof in Tanjung Priok, Jakarta, Indonesia. Persija Jakarta plays there after leaving Gelora Bung Karno Stadium, and the Indonesia national football team uses it as an occasional home. With 82,000 seats, it is Indonesia's largest stadium and Asia's largest football-specific stadium. It also has the largest capacity of any stadium with a retractable roof.
Construction was delayed by land disputes and class-action lawsuits from former squatters whose homes were demolished for the site. Work began in September 2019 and was completed in April 2022. After further delays and preparations, the stadium opened on July 24, 2022. At the FIFA U-17 World Cup of 2023 it staged 16 games, more than any other stadium selected for the tournament.
The stadium stands 73 meters (240 ft) tall and has three tiers of stands under a roof made from an ETFE membrane 100 meters (330 ft) long. Its facade carries a tiger-striped pattern that refers to Persija's color and mascot, while its shape draws on traditional Betawi clothing. A sky-view deck at 70 meters (230 ft), or 20 stories, gives a 180-degree view over North Jakarta.
About this model
Jakarta International Stadium is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
