3D print Skagerak Arena
A free, printable model of the stadium's long covered stand, with its stepped seating and grid roof, and the houses, streets and other buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Skagerak Arena in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Grid roof over a long stand
A thin gridded roof covers one long, stepped stand with many small seat rows. Print friendly adapts these small parts to the print scale; Full detail keeps them on a larger print.
- Layer height for roof and seats
A layer height of 0.12–0.16 mm and a bigger print size keep the roof grid and the seat rows readable.
- One piece with the ground
Skagerak Arena is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Skagerak Arena takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Skagerak Arena
Skagerak Arena is a football stadium in Skien, Norway. It was built in 1923 as Odd Stadion, the home ground of the club Odd, and people often call it Falkum after the part of Skien where it stands. Skagerak Energi, a power company from Norway that has been Odd's main sponsor since 1995, leased the naming rights, and that money paid for part of the rebuilding.
The redevelopment started in November 2006, and by April 2008 the ground had become a modern venue with seating throughout. The pitch was turned 90 degrees to free up space, and it has an artificial surface. The old main stand, now an end stand, is the only feature of the old stadium that survives. Three new two-tier stands were finished in 2007 and 2008, with the east and west stands holding 4,300 each and about 3,000 seated at the south end.
Before the rebuild it could hold roughly 8,600 people, with 5,600 of them seated. The arena has also hosted the Norway national under-21 football team three times, in matches against Portugal in 1979, Romania in 1998 and Scotland in 2003.
About this model
Skagerak Arena is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
