3D print the Solidarnost Samara Arena
A free, printable model of the Solidarnost Samara Arena, a low dome skirted by a star of triangular petals with notches between them, and the surrounding city, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 60 m
- On a 160 mm print
- 13 mm
- Scale
- 1:5,000
60 m of the Solidarnost Samara Arena, 13 mm on your shelf
Make this print opens the generator on a 800 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- The star of petals
The petals drop in steep triangles round the dome, with open notches between them and a lattice behind. Print friendly adapts the thinnest of these parts; a larger print keeps the notch frames clear.
- Ring round the opening
A slim raised ring follows the oval roof opening and stands as the highest line of the model. Layers of 0.12 to 0.16 mm keep that lip crisp.
- One piece with the ground
The Solidarnost Samara Arena is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Solidarnost Samara Arena takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Solidarnost Samara Arena
The Solidarnost Samara Arena goes by other names too: the Samara Arena and Cosmos Arena. Samara, in Russia, is its home, and in 2018 it hosted matches of the FIFA World Cup. The Russian Premier League club FC Krylia Sovetov Samara plays there, in place of Metallurg Stadium. The ground holds 44,918 spectators, and Samara's authorities announced a design tender in late 2012 with the cost estimated at $320 million.
The building is known for a metal dome inspired by space exploration that covers the whole ground, held from below by beam-like structures and reading from outside as a star or spacecraft, with a very slight curve and an almost flat top. An elliptical foundation carries two tiers of seats, all of them under the roof, and the stands are heated. The roof is assembled from 32 cantilevers on pyramidal legs 21.4 m high.
At about 330 m across, the stadium is wider than the Luzhniki Stadium in Moscow, and its height is 60 m. The stadium sits in the north-western quarter of Samara, on the highest ground in the city, with Dalnyaya Street, Arena 2018 Street and Moskovskoye Highway nearby. UEFA rates it as a Category Four stadium, its top category.
About this model
The Solidarnost Samara Arena is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
