3D print 15 Hudson Yards
A free, printable model of 15 Hudson Yards, a slim tower with a scalloped top, standing among taller and shorter neighboring skyscrapers, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About 15 Hudson Yards
15 Hudson Yards, originally called Tower D, is a residential tower on the West Side of Manhattan, completed in 2019. It is in Chelsea, near Hell's Kitchen and the Penn Station area, and belongs to the Hudson Yards project, which redevelops the West Side Yards of the Metropolitan Transportation Authority. Construction began on December 4, 2014. It topped out in February 2018, and its opening came on March 15, 2019.
The building holds 285 residential units. Diller Scofidio + Renfro was lead architect and Rockwell Group was lead interior architect. Straps run along the middle and upper parts of the tower and give it a more fluid look. The executive architect was Ismael Leyva Architects, P.C., and WSP was the lead structural engineer.
The 50th and 51st floors hold an amenity space of 3,700 m² (40,000 sq ft) with an aquatics center, a swimming pool 75 feet long, a spa, a fitness center, a yoga studio, a children's playroom, private dining suites, a screening room, a golf club lounge, wine storage and a business center. An open-air terrace called Skytop sits on top. At the base of the tower is The Shed, a cultural venue that opened on April 5, 2019, and the lobby has a large wooden installation by sculptor Joel Shapiro.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 79 mm | 1:3,750 |
| 200 mm | 98 mm | 1:3,000 |
| 256 mm | 126 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Scalloped crown
- The top of the tower has a scalloped, clover-like outline. Print friendly adapts these small curves to your print scale; Full detail keeps them, best on a larger print with 0.12 to 0.16 mm layers.
- A slim shaft
- The tower is tall and slim beside its neighbors. Printing slowly, with good cooling, helps the upper floors hold their shape.
- One piece with the ground
- 15 Hudson Yards is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 15 Hudson Yards takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
15 Hudson Yards is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a 15 Hudson Yards STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. 15 Hudson Yards grows with the print: about 79 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
