3D print 200 Liberty Street
A free, printable model of 200 Liberty Street, a stepped tower with a pyramid-shaped roof, and the high-rises and waterfront around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About 200 Liberty Street
200 Liberty Street was once called One World Financial Center and belongs to the Brookfield Place complex, which has four towers. It is in Battery Park City, beside the Financial District in Lower Manhattan, New York City. It has 40 floors and reaches 577 feet (176 m). Its position is between the World Trade Center and the Hudson River, on a block of Liberty Street that runs from West Street to South End Avenue. The tower dates from 1986, when it opened with the World Financial Center, to a design by Cesar Pelli & Associates.
Its roof is designed to resemble a mastaba, a truncated square pyramid. The idea of using ancient structures as roofs runs through the rest of the World Financial Center, whose neighboring towers are crowned by a stepped pyramid, a pyramid and a dome. A skybridge over Liberty Street links the tower to the rest of the complex.
Facing the World Trade Center site across the street, it suffered significant damage in the September 11 attacks. Dust and explosions shattered many windows. It was shut for several months, then restored extensively and reopened in 2002. In 2014 Brookfield Place became the name of the whole complex, and the tower took the name 200 Liberty Street.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 47 mm | 1:3,750 |
| 200 mm | 59 mm | 1:3,000 |
| 256 mm | 76 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Sloped pyramid-style roof
- The tower ends in a sloped, pyramid-like roof. Print friendly keeps this crown clean at small scale; Full detail suits larger prints.
- Stepped sides and window rows
- The sides step in at several levels and carry many rows of windows. A bigger print size and a layer height of 0.12–0.16 mm keep these lines legible.
- One piece with the ground
- 200 Liberty Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 200 Liberty Street takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
200 Liberty Street is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a 200 Liberty Street STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. 200 Liberty Street grows with the print: about 47 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
