3D print 200 Madison Avenue
A free, printable model of 200 Madison Avenue and the tall Murray Hill buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 33 mm
- Scale
- 1:3,750
33 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Stepped tower on a wide base
A wide lower block carries a narrower tower that steps back to a decorated crown. A layer height of 0.12–0.16 mm keeps the crown crisp on the upper floors.
- One piece with the ground
200 Madison Avenue is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 200 Madison Avenue takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 200 Madison Avenue
Warren and Wetmore designed 200 Madison Avenue, a 25-story office building in Manhattan's Murray Hill, on Madison Avenue's western side between 35th and 36th Streets. It was built between 1925 and 1926. Over time it has carried several names, among them the Marshall Field Building and the Tower Building.
Red brick with limestone trim covers most of the facade, with terracotta and cast iron in the window spandrels, and the ground story is limestone. A setback occurs above the ninth floor. The lobby, T-shaped, is neo-Renaissance in style, with a north–south arcade linking 35th and 36th Streets, gilded decoration and animal motifs. Zoning limits in the site's eastern portion meant that the lowest stories were first an apartment hotel, and offices filled the smaller upper stories.
The Astor family had hoped to build a commercial building here from the 1910s onward, but J. P. Morgan Jr. and other neighbors objected, and the plans waited a decade. The developer was a syndicate with Texas entrepreneur Jesse H. Jones among its members. The apartment hotel lost money and closed in 1939, after which it became office space. In 2021 the city's Landmarks Preservation Commission designated the lobby an official landmark.
About this model
200 Madison Avenue is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
