3D print 277 Fifth Avenue
A free, printable model of 277 Fifth Avenue, a very slender rectangular tower with a few small notches in its sides, among tall buildings, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About 277 Fifth Avenue
Rafael Viñoly was the architect of 277 Fifth, a condominium tower in Manhattan that is also known as 281 Fifth Avenue. It has 55 stories and 130 residential condominiums, and it reaches 209 meters in height. It has drawn comparison to another Viñoly building, 432 Park Avenue. The building is residential.
Ironstate Development and Kushner Real Estate Group bought the three buildings numbered 277, 279 and 281 Fifth Avenue in 2012, and planned a high-end condo building of 40 stories to a design by HWKN Architects. In June 2014 Victor Group paid $99 million for the site, later paid $50.3 million for 273 and 275 Fifth Avenue, and reportedly spent $174.1 million in all on the land and air rights. The tower was announced in 2015, and building work started the following year. It reached its full height in March 2018, and it was finished by the end of that year.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 55 mm | 1:3,750 |
| 200 mm | 69 mm | 1:3,000 |
| 256 mm | 88 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- A very slim shaft
- The tower is narrow for its height. Printing slowly helps a tall, slim shaft, and layers of 0.12 to 0.16 mm keep its edges crisp.
- Small notches in the sides
- Small recesses break the sides at a few heights. Print friendly adapts these small details to the print scale; Full detail keeps them, which suits a larger print.
- One piece with the ground
- 277 Fifth Avenue is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 277 Fifth Avenue takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
277 Fifth Avenue is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a 277 Fifth Avenue STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. 277 Fifth Avenue grows with the print: about 55 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
