3D print the Daniel LeRoy House
A free, printable model of the Daniel LeRoy House and the dense blocks of buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Daniel LeRoy House in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A small house among bigger blocks
The house is low and mostly hidden by taller neighbors, so little of it shows. A larger print size and Full detail keep its roofline and cornice readable.
- One piece with the ground
The Daniel LeRoy House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Daniel LeRoy House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Daniel LeRoy House
The Daniel LeRoy House sits at 20 St. Marks Place, in Manhattan's East Village. Thomas E. Davis developed brick houses of 3½ stories on both sides of the street, and this Greek Revival house was built as part of that scheme in 1832. Only three houses from the development survive: this one, the Hamilton-Holly House at number 4, and the house at 25 St. Marks Place. The entrance is marble, ornamented with vermiculated blocks.
Daniel LeRoy was a South Street merchant and a son of the wealthy New Yorker Herman LeRoy. He married Susan Fish, a sister of U.S. Senator Hamilton Fish. Her father was Adjutant General Nicholas Fish, and her mother Elizabeth Stuyvesant was a daughter of Peter Stuyvesant. In 1969 the city's Landmarks Preservation Commission made the building a landmark. The National Register of Historic Places listing came on October 29, 1982. Restoration work in spring 1998 included repainting, repointing the brickwork and replacing the cornices.
About this model
The Daniel LeRoy House is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





