3D print 388 Greenwich Street
A free, printable model of 388 Greenwich Street, a tall tower with a pitched, gabled top, with the Hudson River, roads and a strip of park beside it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About 388 Greenwich Street
388 Greenwich Street is a Tribeca office tower in Lower Manhattan, New York City. Its first name was Shearson Lehman Plaza, and it was later called the Travelers Building. Its street frontages are Greenwich, North Moore and West Streets. Together with 390 Greenwich Street, a 10-story neighbor by the Hudson River, it makes up a two-building complex. The World Trade Center site lies roughly ten blocks to the south, and the tower is among TriBeCa's tallest.
Kohn Pedersen Fox Associates designed the building, with Severud Associates handling the structural engineering. Work started in 1985 and finished in 1988. In May 1997 a neon sign showing a red umbrella, 15 by 15 m (50 by 50 ft), was installed near the top of the north side, and a steel red umbrella sculpture stood outside at street level. Both have since been taken down.
Amenities include a day care center, a medical center, a fitness center, a conference center, dining facilities and an outdoor park, and the tower is among the few New York buildings with double-deck elevators. After the September 11 attacks, its courtyard worked as a triage center. A renovation led by Skidmore, Owings & Merrill, announced in 2016, put a glass curtain wall on the lower floors.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 41 mm | 1:3,750 |
| 200 mm | 51 mm | 1:3,000 |
| 256 mm | 65 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Pitched, gabled crown
- The top of the tower has steep roof slopes with small details. Print friendly adapts them to the print scale; Full detail keeps them, which suits a larger print and thin layers of 0.12 to 0.16 mm.
- One piece with the ground
- 388 Greenwich Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 388 Greenwich Street takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
388 Greenwich Street is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a 388 Greenwich Street STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. 388 Greenwich Street grows with the print: about 41 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
