3D print 45 Park Place
A free, printable model of 45 Park Place and the surrounding streets and buildings of Tribeca in New York, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 203 m
- On a 160 mm print
- 55 mm
- Scale
- 1:3,750
203 m of 45 Park Place, 55 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Clean vertical edges
The tower is much taller than it is wide, so its silhouette depends on straight vertical edges. Print slowly, and use 0.12 to 0.16 mm layers to keep them clean.
- One piece with the ground
45 Park Place is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 45 Park Place takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 45 Park Place
45 Park Place is a residential tower at 45 Park Place in Tribeca, Manhattan. It rises 203.3 meters (667 feet) over 43 floors and holds 50 residences. SOMA Architects designed the tower, with Michel Abboud as design architect and Ismael Leyva Architects as architect of record; Piero Lissoni designed the interiors.
Soho Properties is the developer. The tower was first due to be finished in October 2018, but a stop-work order halted construction at the end of 2019. The residential building was designed as a 50-residence luxury condominium tower.
About this model
45 Park Place is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
