3D print 60 Wall Street
A free, printable model of the 60 Wall Street tower, with its notched corners and sloping roof, and the skyscrapers packed around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 227 m
- On a 160 mm print
- 62 mm
- Scale
- 1:3,750
227 m of 60 Wall Street, 62 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Hip roof and notched corners
A pyramid-like roof caps the tower, and the corners below it are notched in narrow strips. Layers of 0.12 to 0.16 mm keep the sloped roof smooth and the notches sharp.
- Tall and slim
The tower is tall and slim for its width. Printing slowly with good cooling helps tall thin shapes, and a bigger print size keeps more of the fine vertical lines.
- One piece with the ground
60 Wall Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 60 Wall Street takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 60 Wall Street
60 Wall Street goes by two earlier names, the J.P. Morgan Bank Building and the Deutsche Bank Building. It is a skyscraper standing on Wall Street, in Lower Manhattan's Financial District in New York City, with 55 stories and a height of 227 m (745 ft). Roche-Dinkeloo, the firm of Kevin Roche and John Dinkeloo, designed the tower, which was built originally for J.P. Morgan & Co. Morgan occupied the entire building when it was finished in 1989, and Deutsche Bank used it as its American headquarters from 2001.
Its postmodern, Greek Revival and neoclassical look was meant to suit the surrounding buildings. The base is four stories high, with arcades of paired columns on Wall and Pine Streets, each column 21 m (70 ft) tall, a nod to 55 Wall Street, which lies to the south. Above the base the corners are notched inward, and the eight stories beneath the roof, beginning at the 42nd floor, have corners arranged to look like columns. Each facade has a glass center banded horizontally with green and pink granite.
A hip roof, a variation of a pyramidal roof, caps the tower. It is clad in copper and stands 12 m (40 ft) tall, and the pyramidal roofs of other Wall Street skyscrapers were its inspiration. A subway entrance and plantings share the enclosed public atrium on the ground floor, which links the entrances on Wall and Pine Streets. The block it sits on runs from Wall Street north to Pine Street, between William Street and Pearl Street.
About this model
60 Wall Street is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
