3D print 750 Seventh Avenue
A free, printable model of 750 Seventh Avenue, a tapering tower that ends in a pointed crown, and the dense Midtown skyscrapers around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About 750 Seventh Avenue
750 Seventh Avenue is an office building with 36 stories, in Midtown Manhattan, New York City. Kevin Roche of Roche-Dinkeloo designed it for developers David and Jean Solomon. Its site is on 49th Street's north side, between Broadway and Seventh Avenue, two blocks north of Times Square. Its black glass facade carries large signs along with etched-glass panels, and on the upper stories the setbacks wind in a spiral pattern up to an offset glass pinnacle that was designed to light up at night. Several critics likened it to a smokestack and a glass pyramid.
Solomon Equities developed the tower on speculation in 1989, on the former site of the Rivoli Theatre. Stratford Wallace, who owned a small three-story building at Broadway and 50th Street, never sold, and his building still stood after the tower rose. Once finished, the tower had no tenants until a law firm leased space in April 1990. That firm disbanded in 1991 without paying rent, and the Solomons put the building into bankruptcy. A consortium of banks took over, and Morgan Stanley bought it in 1994.
The building has a LEED Silver green building certification. Its two-story lobby has walls and floors of gray and white granite, and a reflective ceiling that makes the lobby look taller than it was. An entrance to the 49th Street subway station is inside the base of the building.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 51 mm | 1:3,750 |
| 200 mm | 63 mm | 1:3,000 |
| 256 mm | 81 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Pointed glass crown
- The tower narrows toward an offset, pointed crown. Print friendly adapts the thin tip to the print scale; Full detail keeps it on larger prints. Print slowly with good cooling for the top.
- Stepped, banded shaft
- Setbacks and horizontal bands step up the shaft. A layer height of 0.12–0.16 mm keeps the steps crisp, and a bigger print size keeps the bands distinct.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 750 Seventh Avenue takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
750 Seventh Avenue is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a 750 Seventh Avenue STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. 750 Seventh Avenue grows with the print: about 51 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
