3D print 88 Greenwich Street
A free, printable model of 88 Greenwich Street, a tall tower with a stepped crown, and the dense skyscrapers around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About 88 Greenwich Street
Also called the Greenwich Club Residences, and once known as 19 Rector Street, 88 Greenwich Street occupies the south side of Rector Street in Manhattan's Financial District, between Greenwich and Washington Streets. Lafayette A. Goldstone and Alexander Zamshnick designed the 37-story Art Deco structure, which was built in 1929–30.
An entrance to the Rector Street subway station opened in the basement in 1931, but it was shut by 1941. The building was listed on the National Register of Historic Places during 2002, and in 2006 it was renovated into residential condominiums. Hurricane Sandy flooded it severely in 2012: about three million cubic feet of saltwater poured into the basement and did extensive damage, and the water also dislodged an oil tank, which cracked when it struck a ceiling beam.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 38 mm | 1:3,750 |
| 200 mm | 48 mm | 1:3,000 |
| 256 mm | 61 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Stepped Art Deco crown
- The top of the tower narrows in several steps. Print friendly adapts these small setbacks to the print scale; Full detail keeps them on larger prints.
- Tight among taller towers
- Bigger buildings press in on most sides, and the tower can be hard to pick out from the west. A larger print size keeps its outline distinct.
- One piece with the ground
- 88 Greenwich Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 88 Greenwich Street takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
88 Greenwich Street is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an 88 Greenwich Street STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. 88 Greenwich Street grows with the print: about 38 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
