3D print 90 West Street
A free, printable model of 90 West Street, a boxy tower with a richly ornamented crown, standing beside a park and a wide road, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About 90 West Street
Once called the West Street Building and later the Brady Building, 90 West Street is a 23-story residential tower in Lower Manhattan's Financial District, immediately south of the World Trade Center along West Street. Cass Gilbert was the architect. Its structural engineers were Gunvald Aus and Burt Harrison, and John Peirce built it as general contractor. Constructed between 1905 and 1907, it began as an office building.
The building rises 324 feet (99 m) above the street. Its Gothic styling and ornament worked to accentuate its height. Gilbert drew on two ideas: the three-part "classical column" scheme used in buildings of the 19th century, and the "romantic tower" he later developed in works like the Woolworth Building. Terracotta covers the facade, with granite for the two-story base, and the waterfront site meant pilings had to be driven deep into the ground.
Its top floors held "The Garret Restaurant", advertised as the world's highest restaurant. After the World Trade Center collapsed next door in the attacks of September 11, 2001, the building suffered severe damage. Extensive refurbishment followed, and it reopened in 2005 as the residential 90 West. New York City has designated it a landmark, and it is also entered in the National Register of Historic Places.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 27 mm | 1:3,750 |
| 200 mm | 33 mm | 1:3,000 |
| 256 mm | 43 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Crown of small gables
- The top of the tower carries a dense band of pointed gables and decoration. Print friendly adapts them to the print scale; Full detail keeps them, which suits a larger print at 0.12 to 0.16 mm layers.
- One piece with the ground
- 90 West Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 90 West Street takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
90 West Street is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a 90 West Street STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. 90 West Street grows with the print: about 27 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
