3D print the Algonquin Hotel
A free, printable model of the Algonquin Hotel, a smaller building closely hemmed in by much taller Midtown towers, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Algonquin Hotel in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small model among towers
In the model only a small piece of this hotel shows between very tall neighbors. A larger print and a 0.12–0.16 mm layer height keep its facade details; Full detail keeps every modeled feature.
- One piece with the ground
The Algonquin Hotel is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Algonquin Hotel takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Algonquin Hotel
The Algonquin Hotel stands on West 44th Street in Midtown Manhattan, at number 59, and opened in 1902. Goldwin Starrett was the architect, working for the Puritan Realty Company. Writers and theater people have stayed here through the years, among them the early 20th century's Algonquin Round Table club members. New York City has designated the hotel a landmark, and it belongs to Historic Hotels of America.
Most of the building rises twelve stories, though its far western end has just three. Rusticated limestone blocks clad the first two stories, and above them Renaissance Revival brick covers the facade, with details in limestone, metal and terracotta that take cues from the Beaux-Arts style. On opening, the hotel had a big restaurant and a smaller cafe, the latter later becoming the Oak Room cabaret. The Blue Bar occupies the ground story of the annex.
The hotel was first meant as an apartment hotel but few people stayed long-term. Frank Case leased it in 1907 and turned it into a traditional lodging establishment that attracted theatrical and literary guests. He bought it in 1927 and ran it until his death in 1946. As its first owner-manager, he set up traditions that included an official hotel cat and discounts for struggling authors.
About this model
The Algonquin Hotel is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Outside the United States this design may still be protected; check the rules where you sell.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





