3D print the St. Regis New York
A free, printable model of the St. Regis New York, partly hidden among much taller Midtown buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 26 mm
- Scale
- 1:3,750
26 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Rooftop details among towers
Only parts of this hotel show between much taller neighbors, including small roof pieces and a rounded roofline. A larger print and a 0.12–0.16 mm layer height keep those details; Full detail keeps all of them.
- One piece with the ground
The St. Regis New York is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The St. Regis New York takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the St. Regis New York
John Jacob Astor IV developed the St. Regis New York, a luxury hotel in Midtown Manhattan, at 2 East 55th Street, on the southeast side of the corner where Fifth Avenue meets 55th Street. Trowbridge & Livingston designed it, and it was completed in 1904. An annex to the east, by Sloan & Robertson, followed in 1927. New York City has designated the hotel a landmark.
The 18-story hotel follows the Beaux-Arts style and has a limestone facade split into a base, a shaft and a capital, like the parts of a column. Because so much mechanical equipment was needed, three basement levels house it. Marble and bronze decorated the interior at the opening; the first floor held a palm court, restaurant, cafe and hotel office, and the second held a ballroom, banquet hall and private dining room.
Construction began in 1901, and Astor took the hotel's name from the Adirondack Mountains' Upper St. Regis Lake. It opened on September 4, 1904, and soon gained a reputation as an upscale hostelry. Rudolph Haan ran it until 1926. Astor's son Vincent sold it to Benjamin Newton Duke in 1927; Duke developed the annex.
About this model
The St. Regis New York is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
