3D print American Airpower Museum Hangars
A free, printable model of the American Airpower Museum hangars, a large hangar building with a low gabled roof, with the surrounding grounds and nearby buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
American Airpower Museum Hangars in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Wide low roof
The hangar is a broad box under a low gabled roof, with a few small blocks on the roof. Print friendly adapts those small parts to the print scale; Full detail keeps them on a larger print.
- Door panels along the wall
The long wall carries fine door and window lines. A layer height of 0.12–0.16 mm and a bigger print size keep them crisp.
- One piece with the ground
American Airpower Museum Hangars is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. American Airpower Museum Hangars takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About American Airpower Museum Hangars
East Farmingdale, New York, is where the American Airpower Museum sits, at Republic Airport, on land once occupied by Republic Aviation. Its collection mixes aviation artifacts with aircraft from across the factory's long history, and a hangar of 35,000 square feet (3,300 m²) there dates from around 1940.
Static displays include a Republic F-105 Thunderchief, a first-generation Republic F-84 jet fighter and a rare RF-84F reconnaissance variant with swept wings. The A-10 Thunderbolt II, built by Fairchild Republic, was the factory's final production aircraft. Volunteers include former Republic workers and veterans from every military branch. The museum was established in 1998, and Jeff Clyman founded it, backed by a state grant of $250,000.
About this model
American Airpower Museum Hangars is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
