3D print the American Stock Exchange Building
A free, printable model of the American Stock Exchange Building, surrounded by the tall towers of Lower Manhattan, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 64 m
- On a 160 mm print
- 18 mm
- Scale
- 1:3,750
64 m of the American Stock Exchange Building, 18 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall block among towers
In these renders the building is largely hidden by the taller towers around it. A layer height of 0.12-0.16 mm keeps the long vertical lines of the facade crisp on a larger print.
- One piece with the ground
The American Stock Exchange Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The American Stock Exchange Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the American Stock Exchange Building
The American Stock Exchange Building, once called the New York Curb Exchange Building, also goes by 86 Trinity Place and 123 Greenwich Street. It was the headquarters of the American Stock Exchange. Starrett & van Vleck designed it in two sections, and it stretches from Greenwich Street to Trinity Place in Lower Manhattan's Financial District, with its main entrance on Trinity Place. It recalls a time when stock trading outside the New York Stock Exchange took place outdoors, "on the curb".
The first building went up in 1921 and was enlarged between 1929 and 1931 after trading volume grew. The original part, facing Greenwich Street, is in the Renaissance Revival style, with large arched windows that lit the former trading floor. The eastern annex on Trinity Place is a 14-story Art Deco building about 52 m (170 ft) long and 64 m (210 ft) tall, with a limestone facade over a granite base. Metal reliefs on it depict the kinds of commodities and securities the exchange handled.
In 1953 the New York Curb Exchange became the American Stock Exchange, and in 2008 it left once the AMEX had merged with the NYSE. In 1978 the building became a National Historic Landmark, and in 2012 New York City designated it a landmark too. It also contributes to the Wall Street Historic District, which was created in 2007.
About this model
The American Stock Exchange Building is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
