3D print the Amusement Palace
A free, printable model of the Amusement Palace at the western wall of the Moscow Kremlin, with the surrounding walls and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Details on a palace facade
The window surrounds, cornice and roof trim are the finest features on a palace of this kind. Print friendly adapts them to a small print; a larger print or a 0.12 mm layer height keeps the carving legible.
- One piece with the ground
The Amusement Palace is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Amusement Palace takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Amusement Palace
The Amusement Palace stands against the western wall of the Moscow Kremlin, with the Commandant and Trinity towers on either side. Ilya Miloslavsky had it built in 1652; he was Tsar Alexei Mikhailovich's father-in-law. When Miloslavsky died the palace passed to the state and became a theater, where performances were staged to amuse the tsar's family and court. That use gave the building its name.
Under Peter the Great the palace housed the Police Department, and during the 19th century the Moscow commandant took up residence there. Later Joseph Stalin lived in the palace, and his second wife, Nadezhda Alliluyeva, died by suicide in the building. The palace was restored between 2002 and 2004, work that included the original decor of the facade and of its palace church. It is listed as a federal cultural heritage site.
About this model
The Amusement Palace is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
