3D print the Astoria Center of Israel
A free, printable 3D model of the Astoria Center of Israel synagogue, with its arched windows, and the buildings and streets around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Arched windows and piers
The front has tall round-arched windows and piers in fine relief. Full detail keeps them on larger prints, and a 0.12–0.16 mm layer height keeps the curves crisp.
- One piece with the ground
The Astoria Center of Israel is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Astoria Center of Israel takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Astoria Center of Israel
This Conservative Jewish synagogue stands at 27-35 Crescent Street in Astoria, Queens. Its forbears date from the 1880s, and the Classical Revival building was completed in 1926. Both the New York State and National Registers of Historic Places added it in October 2009.
Architect Louis Allen Abramson designed it, and it was among the first synagogues in Queens. The front is brick, two stories high and five bays across, with cast stone trim. Ionic piers, double-height, flank round-arched windows. They carry an entablature topped by a balustrade, and the round-arched entrance carries a cartouche inscribed with a Star of David.
The roots of the center lie in Mishkan Israel, a congregation begun sometime in the 1880s that built a building in 1906 and a Talmud Torah next to it in 1921. Later that education building became the center's home. Efforts to enlarge it began in 1926, and murals by the French artist Louis Pierre Rigal were added a few years after completion.
About this model
The Astoria Center of Israel is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
