3D print AVA DoBro
A free, printable model of AVA DoBro, a tall residential tower, and the Downtown Brooklyn buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About AVA DoBro
AVA DoBro is a residential high-rise in Downtown Brooklyn, New York City. Its other names are Avalon Willoughby West and 100 Willoughby, the street address. The developer, AvalonBay Communities, built it with 826 units across 57 floors, and the project came with a new entrance to a nearby subway station.
That entrance, which has an elevator, serves the Jay Street-MetroTech station. The tower topped out in July 2015, making it the tallest building in Brooklyn, 34 feet (10 m) above 388 Bridge Street. A few months later, The Hub passed it.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 53 mm | 1:3,750 |
| 200 mm | 66 mm | 1:3,000 |
| 256 mm | 85 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Tall slim tower
- This is a narrow high-rise with small rooftop details. Print slowly with good cooling, and use a layer height of 0.12-0.16 mm to keep the upper floors clean.
- One piece with the ground
- AVA DoBro is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. AVA DoBro takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
AVA DoBro is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an AVA DoBro STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. AVA DoBro grows with the print: about 53 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
