3D print the Basilica del Santo Niño
A free, printable model of the basilica, its bell tower and the convent wings around a courtyard, set among the streets and buildings of Cebu City, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Basilica del Santo Niño in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Domed bell tower and façade
The bell tower has a domed cap, and the façade carries fine ornament. These are the most delicate parts of the print, so use Full detail on a larger print, or Print friendly for a small one, and print slowly.
- Long courtyard roofs
Broad roofs run around the courtyard wings and the church. A 0.12–0.16 mm layer height keeps the roof edges and window rows crisp across the long walls.
- One piece with the ground
The Basilica del Santo Niño is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Basilica del Santo Niño takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Basilica del Santo Niño
Also called simply the Santo Niño Basilica, this Catholic minor basilica stands in Cebu City, Philippines. It was founded in 1565 by Andrés de Urdaneta together with Diego de Herrera, both Augustinian friars, and no church in the country is older. It is said to occupy the spot where the Santo Niño de Cebú image turned up again while Miguel López de Legazpi, a Spanish conquistador, was on his expedition.
The first church on the site burned down on November 1, 1566, and a later one burned in March 1628. The foundations of the present stone church were started on February 24, 1735, and it was completed on January 16, 1740. Pope Paul VI raised it to minor basilica status on April 1, 1965, and the Holy See gave it the title "Mother and Head of all Churches" for the Philippines.
An earthquake of 7.2 magnitude struck Bohol on October 15, 2013, and in Cebu City it brought down most of the belfry and the façade of the basilica. The basilica reopened on December 24, 2014, while repairs went on, and work on the bell tower finished in October 2016. On April 14, 2021, the church and convent complex was named a National Cultural Treasure.
About this model
The Basilica del Santo Niño is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





