3D print Paoay Church
A free, printable model of Paoay Church in the Philippines, with its row of side buttresses, its separate bell tower and the town blocks around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Paoay Church in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Stepped side buttresses
The row of buttresses along the nave is the signature feature, with small finials on top. Use Full detail on a larger print to keep each step, or Print friendly to adapt thin tips to the print scale.
- Separate bell tower
The slender bell tower stands beside the church. Print it slowly with good cooling, and consider a 0.12 mm layer height to keep its upper stories crisp.
- One piece with the ground
Paoay Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Paoay Church takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Paoay Church
Paoay Church, also known as Saint Augustine Parish Church, is a Roman Catholic church under the Diocese of Laoag and sits in Paoay, Ilocos Norte (Philippines). Construction of the present building began in 1694 under the Augustinian friar Father Antonio Estavillo, and the church was completed in 1710.
The most striking feature is the set of 24 huge buttresses, each about 1.67 meters (5.5 ft) thick, along the sides and back. They were conceived as a defense against earthquakes, and the church is described as the Philippines' primary example of Spanish colonial earthquake baroque architecture. The side buttresses are stepped, possibly to give easy access to the roof. The walls use coral stone low down and brick higher up.
A three-story coral bell tower stands apart from the church on the right side of the facade, resembling a pagoda. It was set at some distance as protection against earthquakes. The church was declared a National Cultural Treasure in 1973, and in 1993 it became part of the UNESCO World Heritage Site Baroque Churches of the Philippines.
About this model
Paoay Church is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





