Bell Tower (Perth) in 3D
The Bell Tower (Perth) appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Bell Tower (Perth) may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- Real height
- 83 m
- On a 160 mm print
- 22 mm
- Scale
- 1:3,750
83 m of the Bell Tower (Perth), 22 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Needle-thin spire
The spire tapers to a fine point far above the bell chamber. Print slowly with good cooling, and choose Full detail on a larger print to keep the tip; Print friendly adapts it to smaller prints.
- Hidden among tall towers
Taller round towers stand close to the spire and hide it from some sides. A layer height of 0.12–0.16 mm keeps the spire's narrow faces and the curved sails beneath it crisp.
- One piece with the ground
The Bell Tower (Perth) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Bell Tower (Perth) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Bell Tower (Perth)
The Bell Tower, also called the Swan Bell Tower, is an 82.5 m (271 ft) campanile of copper and glass in Perth, Western Australia, purpose-built to hold the Swan Bells. The set of 18 bells takes its name from the Swan River, which the tower overlooks, and in the world only one set of change ringing bells is larger: the 19 bells of Christ Church Cathedral, Dublin.
Twelve of the bells are historic ones from the church of St Martin-in-the-Fields in Trafalgar Square, London, given to the State of Western Australia during the 1988 Australian bicentenary. The Whitechapel Bell Foundry cast the other six, using metals mined in Western Australia. The A$5.5-million building was put up to mark the new millennium and opened on December 10, 2000, although at the time locals who opposed it criticized it as wasteful spending.
Local architects Hames Sharley designed the tower, and the engineering firm Arup designed its bell chamber. Because the bells together weigh about 9 tonnes (20,000 lb), the six-story chamber is reinforced concrete cast in situ for stiffness. Copper sails and glass 30 m (98 ft) tall wrap the chamber, and the glass-clad spire narrows as it rises to a point.
About this model
The Bell Tower (Perth) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





