3D print Bunratty Castle
A free, printable model of Bunratty Castle and its battlemented walls, with the water, roads and grounds around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Bunratty Castle in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Battlements and a tall square keep
The crenellated parapets on the corner towers are the smallest, finest details. Landmark detail set to Print friendly keeps them sturdy, while a larger print or Full detail keeps each battlement visible.
- One piece with the ground
Bunratty Castle is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Bunratty Castle takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Bunratty Castle
Bunratty Castle is a large tower house from the 15th century in County Clare, Ireland. It stands in the middle of Bunratty village, beside the N18 road, which runs between Limerick and Ennis, near the airport and Shannon Town. Bunratty is Irish for the mouth of the Ratty River, a second name for the Owenogarney River; that river passes the village and castle and empties into the Shannon Estuary.
The present building is the fourth castle on the site. Its construction started around 1450, and its builder may have been Maccon Sioda MacNamara, a chieftain of Clann Cuilein. He died before it was finished, and his son Sean Finn completed it. Around 1500 the castle passed to the O'Briens, who were Munster's most powerful clan and later became Earls of Thomond, and who expanded the site and made it their chief seat.
In the Confederate Wars, a force holding the castle could blockade sea access to Limerick and the river Shannon. Defending it fell to Rear-Admiral Penn, whose son William Penn founded Pennsylvania. The Great Hall's roof fell in during the late 19th century. In 1956 the 7th Viscount Gort bought and restored the castle with help from the Office of Public Works, reroofing it and saving it from ruin, and it opened to the public in 1960.
About this model
Bunratty Castle is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





