A white 3D print of the Chester A. Arthur Home, a narrow building set among taller buildings and a church on a city block.

Chester A. Arthur Home in 3D

The Chester A. Arthur Home appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Chester A. Arthur Home model, North view North
  • Chester A. Arthur Home model, East view East
  • Chester A. Arthur Home model, South view South
  • Chester A. Arthur Home model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Chester A. Arthur Home may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
5 mm
Scale
1:3,750

5 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Narrow front between neighbors

    The facade is narrow and sits close to taller neighbors. A larger print keeps small details; Print friendly adapts thin parts to the print scale.

  2. One piece with the ground

    The Chester A. Arthur Home is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Chester A. Arthur Home takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Chester A. Arthur Home

The Chester A. Arthur Home served as the home of Chester A. Arthur (1829–1886), the 21st U.S. president. He lived there both before and after a four-year stretch in Washington, D.C., serving as vice president and afterward as president, and he spent most of his adult life in the house. Its address is 123 Lexington Avenue, on the block running from 28th Street to 29th Street in Manhattan's Rose Hill.

After President James Garfield was shot on July 2, 1881, Arthur, then vice president, retreated to the house. He was in residence there at the time of Garfield's death on September 19, and was sworn in as president inside it. In 1964 the Native New Yorkers Historical Society, together with New York Life Insurance, put up a bronze plaque inside, and National Historic Landmark status came to the house on January 12, 1965.

The five-story masonry house has Romanesque Revival styling and is three bays wide. A showy cornice hides a low-pitched or flat roof. Segmented arches frame the windows of the top three floors, which have splayed stone lintels and bracketed sills. Its frontage on Lexington Avenue is 21.83 feet (6.65 m), on a lot of 1,747 square feet that runs back 80 feet (24 m).

About this model

The Chester A. Arthur Home is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in New York

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits