3D print the Church of the Ascension, Roman Catholic
A free, printable model of the Church of the Ascension, a long gabled church with two small turrets at its front, squeezed between taller buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Church of the Ascension, Roman Catholic in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Twin turrets at the front
Two slim turrets with pointed tops rise at the front of the church. Print friendly adapts thin parts like these to the print scale; Full detail keeps them, best on a larger print.
- Long gabled roof
A long gabled roof runs the length of the nave, with rows of small openings along its walls. A layer height of 0.12–0.16 mm keeps them crisp.
- One piece with the ground
The Church of the Ascension, Roman Catholic is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Church of the Ascension, Roman Catholic takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Church of the Ascension, Roman Catholic
The Church of the Ascension, a Catholic parish church, belongs to the Archdiocese of New York. Its address is 221 West 107th Street, in Manhattan Valley, part of Manhattan's Upper West Side. The parish dates from 1895. The elaborate church stands midblock, in the stretch of 107th Street running from Amsterdam Avenue to Broadway, with a parish house attached.
Schickel & Ditmars, described as German American church building designers, designed the church and parish house in the Sicilian Romanesque style, a hybrid of Norman and Byzantine. Both were built between 1896 and 1897. A Müller & Abel organ and organ case followed in 1898.
In 1911 the parish added a parochial school of brick and stone, four stories tall, built by P. J. Brennan & Son and designed by the architect F. A. de Meuron. The church was renovated in 1939. Films and television have used it as a location, among them Keeping the Faith (2000); an episode of White Collar (2009) presented it as "Trinity Church".
About this model
The Church of the Ascension, Roman Catholic is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
