3D print the Hermitage Theatre
A free, printable 3D model of the Hermitage Theatre and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Hermitage Theatre in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 10 mm
- Scale
- 1:3,750
10 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small façade details
Fine detail on walls is the first thing to soften at small sizes. Print friendly adapts thin parts to the print scale; Full detail keeps every modeled feature, which suits a larger print or a fine nozzle.
- One piece with the ground
The Hermitage Theatre is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Hermitage Theatre takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Hermitage Theatre
Located in Saint Petersburg, Russia, the Hermitage Theatre is among five Hermitage buildings on the Neva River's Palace Embankment. It served as the Winter Palace's second theater, following the Russian Imperial Theater, which ran from 1764 until 1783. Catherine the Great ordered the new building, and Giacomo Quarenghi gave it a Palladian design. It was built between 1783 and 1787. Peter the Great's decaying Third Winter Palace was torn down to clear the site, though its old foundations still show on the ground floor.
The semicircular auditorium is decorated with colored marble and has niches (ten in all) holding statues of Apollo and the muses. Since the interior was never overhauled, the original stage machinery is still in place. The formal opening took place on November 22, 1785. The hall could seat at most 250 people, yet it was often overcrowded. Performances were usually attended by several dozen aristocrats, all invited by the monarch herself.
The theater entertained the imperial family up to the Russian Revolution. Performers for the last Russian tsar included Fyodor Chaliapin, Anna Pavlova and Mathilde Kschessinska, and Marius Petipa's ballet Harlequinade premiered here in 1900. After the Bolsheviks shut the theater and put the building to administrative use, performances only resumed in 1991.
About this model
The Hermitage Theatre is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
