3D print the Corbin Building
A free, printable model of the Corbin Building and the tall Financial District towers that surround it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 41 m
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
41 m of the Corbin Building, 11 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Narrow body, pyramid roofs
This is a long, narrow building with small pyramid-roofed towers at each end, mostly hidden between tall neighbors. Print friendly adapts the small roofs to the print scale; Full detail keeps them, best on a larger print.
- One piece with the ground
The Corbin Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Corbin Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Corbin Building
In Manhattan's Financial District, where John Street meets Broadway, the Corbin Building stands on the northeast corner. It is also called 13 John Street and 192 Broadway. Francis H. Kimball designed it as a speculative development, completed in 1888–1889, mixing Romanesque Revival with French Gothic detailing. It is named after Austin Corbin, who led the Long Island Rail Road as a president and founded several banks.
The exterior is polychrome, mixing brick, brownstone and terracotta, with rounded arches picked out in terracotta, and the vaulted ceilings inside use a Guastavino tile system. The building dates from before skyscrapers had steel skeletons, so it relies on cast-iron beams and load-bearing masonry walls. It is 135 feet (41 m) tall, mostly eight stories, with a single-story tower topped by a pyramidal roof at each of its western and eastern ends. It stands on a narrow trapezoidal lot with a Broadway frontage of 20 feet (6.1 m).
The lowest three stories are Long Meadow brownstone, and above them is light brick with red-brown terracotta trim. The building was significantly taller than others around it when it went up. The Metropolitan Transportation Authority rehabilitated it as part of the Fulton Center project, which improved the adjoining Fulton Street subway station. The National Register of Historic Places listed it on December 18, 2003, and New York City named it a landmark on June 23, 2015.
About this model
The Corbin Building is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
