3D print Dabaihui Plaza
A free, printable model of Dabaihui Plaza and the streets and buildings around it in Shenzhen, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 376 m
- On a 160 mm print
- 101 mm
- Scale
- 1:3,750
376 m of Dabaihui Plaza, 101 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A very tall tower
The tower is extremely tall next to its base. A larger print makes the shaft steadier and the facade lines clearer; print slowly for the upper floors.
- One piece with the ground
Dabaihui Plaza is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Dabaihui Plaza takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Dabaihui Plaza
Dabaihui Plaza is a supertall skyscraper in Shenzhen, Guangdong, China. The tower rises 375.5 meters (1,232 ft) and carries 80 floors above ground. Its architect was Kohn Pedersen Fox, and its style is recorded as postmodern architecture. The building also has the Chinese name 大百汇广场. It is one of the supertall skyscrapers in Shenzhen.
Work on the tower started in 2012 and finished in 2021. The tower was designed by Kohn Pedersen Fox. The finished tower is a skyscraper in Shenzhen, a city in Guangdong, China. The tower's 80 floors and 375.5-meter (1,232 ft) height place it in the supertall class.
About this model
Dabaihui Plaza is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
