3D print Huiyun Center
A free, printable model of the Huiyun Center and the streets and buildings around it in Shenzhen, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 359 m
- On a 160 mm print
- 96 mm
- Scale
- 1:3,750
359 m of Huiyun Center, 96 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall, clean shaft
The tower is tall and narrow against its base. A larger print keeps the shaft steady and the facade lines readable, and 0.12–0.16 mm layers sharpen the vertical detail.
- One piece with the ground
Huiyun Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Huiyun Center takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Huiyun Center
Huiyun Center, a super-tall skyscraper, rises in the city of Shenzhen, in Guangdong, China. It reaches 359.2 meters and has 80 floors above ground. Work on it started in 2016 and finished in 2023. The mixed-use building includes both office space and a hotel, and it opened in 2023.
It belongs to Shenwan Huiyun Center, a model district that mixes work, leisure and retail in Shenzhen. That district is described as having good transport links. The owner of the building is Vanke, and its 80 floors serve both offices and a hotel. The tower is a mixed-use building.
About this model
Huiyun Center is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
