3D print Shenzhen Special Zone Press Tower
A free, printable model of Shenzhen Special Zone Press Tower, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 260 m
- On a 160 mm print
- 72 mm
- Scale
- 1:3,750
260 m of Shenzhen Special Zone Press Tower, 72 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall tower at default size
The tower is tall at the default print size, so print it slowly with good cooling. A larger print leaves more room for the details near the top.
- One piece with the ground
Shenzhen Special Zone Press Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Shenzhen Special Zone Press Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Shenzhen Special Zone Press Tower
Shenzhen Special Zone Press Tower is a 260 m (853 ft) office skyscraper in the Futian borough in Shenzhen, China. It was completed in 1998 with 47 floors above ground and 3 below. The building is known in Chinese as 深圳特区报业大厦 and is built in postmodern style. It is a skyscraper.
The roof stands at 187 meters, with the main roof over the curved glass curtain at 167 meters. The Shenzhen Press Group occupies the building, which is used as offices. The tower is an office building with 47 above-ground floors, and it stands in Lianhua Subdistrict in the Futian borough.
About this model
Shenzhen Special Zone Press Tower is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
