3D print Drum Hill High School
A free, printable model of a large school building with a flat roof and rows of windows, with nearby houses and streets around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Flat roof with small details
The flat roof carries many small skylight-like boxes and a thin parapet. A layer height of 0.12–0.16 mm and a bigger print size keep these small details crisp.
- One piece with the ground
Drum Hill High School is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Drum Hill High School takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Drum Hill High School
Drum Hill High School is a historic school in Peekskill, Westchester County, New York, later readapted as the Drum Hill Senior Living Community. Builders worked between 1909 and 1911 to produce a three-story, E-shaped building of gray buff pressed brick in the Classical Revival style, with an elaborate light court.
The school had an auditorium, a gymnasium, science laboratories and classrooms with room for 1,000 students. It served as a school until 1972, and the building was later turned into a senior living community. The National Register of Historic Places added it in 1979.
About this model
Drum Hill High School is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
