3D print the Eldridge Street Synagogue
A free, printable model of the Eldridge Street Synagogue, a small building among taller Lower Manhattan blocks and streets, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small building, tall neighbors
The synagogue is small and low next to the taller buildings around it. A larger print size keeps more of its facade detail, and a layer height of 0.12 to 0.16 mm keeps edges crisp.
- Rose window and towers
The front has a rose window, two stair towers and finials on the roof. Print friendly adapts these small parts to the print scale; Full detail keeps them on larger prints.
- One piece with the ground
The Eldridge Street Synagogue is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Eldridge Street Synagogue takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Eldridge Street Synagogue
Manhattan's Chinatown and Lower East Side neighborhoods are home to the Eldridge Street Synagogue, an Orthodox Jewish house of worship at 12-16 Eldridge Street. Congregation Kahal Adath Jeshurun had it built in 1887, and it ranks among the first synagogues put up by Eastern European Jews in the U.S. Before it, many Jews in the area worshipped in rented rooms that served as makeshift synagogues. Its dedication was on September 4, 1887.
The Herters, Peter and Francis William, drew on the Moorish Revival style and blended in Gothic Revival and Romanesque Revival details. The street front has a rose window, arched openings and a pair of stair towers. Another rose window faces the rear, and finials top the roofs. The main space, the sanctuary, has seating on two levels, a Torah ark and a bimah in the center. The lower level began as a study hall and has been converted to galleries.
Membership reached a peak of up to 800 between 1890 and 1915, then fell sharply after the 1920s. The main sanctuary closed entirely in 1954. In the 1970s preservationists set out to save the building, and by the early 1980s they had stabilized it. The Museum at Eldridge Street, which began in 1986 under the name Eldridge Street Project, shares the building, and a reconstruction was completed in 2007. It holds both National Historic Landmark and New York City landmark designations.
About this model
The Eldridge Street Synagogue is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
