3D print Etihad Tower 2
A free, printable model of Etihad Tower 2 among surrounding towers, roads, and waterfront, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 305 m
- On a 160 mm print
- 83 mm
- Scale
- 1:3,750
305 m of Etihad Tower 2, 83 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Retain the fine facade pattern
Fine vertical marks run along the tall tower below its sloping roof. A larger print with Full detail keeps these modeled features; use Print friendly to adapt small details at compact sizes.
- One piece with the ground
Etihad Tower 2 is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Etihad Tower 2 takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Etihad Tower 2
Etihad Tower 2 belongs to the five-tower Etihad Towers complex in Abu Dhabi. The city is the capital of the United Arab Emirates, and the complex stands opposite the Emirates Palace hotel. Tower 2 measures 305 meters (1,001 ft) in height and topped out in November 2010 alongside Tower 5. Across the complex, the buildings accommodate a mix of offices, apartments, and a hotel. Construction of the development had an estimated cost of 2.5 billion Dirhams.
Tower 2 contains an observation deck called Observation Deck at 300. Visitors can reach it from the hotel in neighboring Tower 1 through a connecting podium at a lower level. The Jumeirah at Etihad Towers Hotel opened in Tower 1 in November 2011. The complex also appeared on screen in Furious 7, a 2015 film. In that film, the characters Dominic Toretto and Brian O'Conner drive a stolen Lykan HyperSport through three towers.
About this model
Etihad Tower 2 is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
