3D print ADNOC Headquarters
A free, printable model of the ADNOC Headquarters, a very tall slab with an open top frame and a triangular canopy, and the roads around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About ADNOC Headquarters
Home to the Abu Dhabi National Oil Company, or ADNOC, this skyscraper office complex rises in Abu Dhabi, United Arab Emirates, to a design by HOK. The complex has more than 65 floors in all, and its parts include an office tower, a corniche club, an SPC and crisis management center, a heritage museum plus further supporting facilities.
The design uses energy efficiency and sustainable engineering technologies, among them a double skin facade and LED lighting on the exterior. The tower reaches 342 meters, and Besix was the main building contractor. ADNOC is both the occupant and the owner of the building.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 92 mm | 1:3,750 |
| 200 mm | 115 mm | 1:3,000 |
| 256 mm | 148 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Open frame at the top
- The upper end of the slab is an open rectangular frame with a block inside. Print slowly with good cooling, and use Print friendly to adapt the thin edges to the print scale.
- Canopy on thin posts
- A triangular canopy at the base stands on slim posts. Full detail keeps them, a larger print size makes them sturdier, and layers of 0.12–0.16 mm keep the canopy edge crisp.
- One piece with the ground
- ADNOC Headquarters is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. ADNOC Headquarters takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
ADNOC Headquarters is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an ADNOC Headquarters STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. ADNOC Headquarters grows with the print: about 92 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
