3D print Fagen Fighters WWII Museum Hangars
A free, printable model of the Fagen Fighters WWII Museum hangars and the open ground and roads around them, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Fagen Fighters WWII Museum Hangars
The aviation-focused Fagen Fighters WWII Museum is in Granite Falls, Minnesota. Its founder, Ron Fagen, purchased a P-51, his first warbird, in 1994 and set up Fagen Fighters Restoration in 1998, though the museum proper dates only from 2012.
Its grounds hold four display hangars, one hangar for restoration work, and reproductions of a Quonset hut and a control tower. A fourth display hangar, which features U.S. Navy aircraft, opened in December 2023. In 2017 the museum bought spare parts that had belonged to the collector Jay Wisler.
A boxcar once used to deport Jews during the Holocaust, acquired from Georgenthal, Germany, was unveiled at the museum in May 2016. When a tornado hit the airport in July 2016, a number of other buildings suffered damage, but the museum did not.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 3 mm | 1:3,750 |
| 200 mm | 4 mm | 1:3,000 |
| 256 mm | 5 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Arched hangar roofs
- Several hangars have curved roofs. A layer height of 0.12 to 0.16 mm keeps the curves smooth, and a larger print size gives the low buildings more presence.
- Small buildings, wide ground
- The hangars are low and spread over open ground. Print friendly adapts small details such as roof fittings to the print scale.
- One piece with the ground
- Fagen Fighters WWII Museum Hangars is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Fagen Fighters WWII Museum Hangars takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Fagen Fighters WWII Museum Hangars is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Fagen Fighters WWII Museum Hangars STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Fagen Fighters WWII Museum Hangars grows with the print: about 3 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
