3D print the Feuchtwanger Stable
A free, printable model of the Feuchtwanger Stable and the taller buildings that crowd around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Surrounded by taller buildings
The stable is a mid-height building with taller neighbors on several sides, so much of it is hidden in side views. Print friendly adapts its small trim to the print scale; a bigger print keeps more of it.
- One piece with the ground
The Feuchtwanger Stable is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Feuchtwanger Stable takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Feuchtwanger Stable
Fort Greene, in Brooklyn, New York, is home to the Feuchtwanger Stable. Built in 1888, it follows the Romanesque Revival style and rises three stories in brick with stone and terra cotta trim. Three wide round arches on the first floor once let horses in.
Over time the building was used as a candy factory, a storage warehouse, then an auto repair garage. A 1988 conversion turned it into loft condominiums. A National Register of Historic Places listing had come two years earlier, in 1986.
About this model
The Feuchtwanger Stable is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
