3D print Finsbury Park station
A free, printable 3D model of Finsbury Park station in London and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Finsbury Park station in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Wide interchange, small parts
An interchange with platforms and bus stations spreads over a wide area with many small parts. Print friendly adapts them to the print scale; a larger print size keeps more detail.
- One piece with the ground
Finsbury Park station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Finsbury Park station takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Finsbury Park station
Finsbury Park station in North London is an interchange where Underground trains, National Rail trains and London buses meet. The complex joins two bus stations, a National Rail station and an Underground station, all connected. The name comes from Finsbury Park close by, which ranks among London's oldest Victorian parks and opened in 1869.
The station lies on the East Coast Main Line, which runs from King's Cross to northern England and Scotland. The Great Northern Railway built its southern section in stages, from the 1840s into the early 1850s. The first station here opened on July 1, 1861 under the name Seven Sisters Road (Holloway), and it was renamed Finsbury Park on November 15, 1869. The Great Northern & City Railway, an underground line linking Finsbury Park and Moorgate, opened on February 14, 1904.
The Piccadilly line of the London Underground began life under the name Great Northern, Piccadilly and Brompton Railway, which opened on December 15, 1906, running from Finsbury Park to Hammersmith in west London. The interchange had long been seen as a serious bottleneck for northbound passengers. An extension of the Piccadilly line to Cockfosters followed, with its first section to Arnos Grove opening on September 19, 1932.
About this model
Finsbury Park station is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
